|
|
Heat treatement of tool steels
Kubín, Matěj ; Moravčík, Igor (referee) ; Jan, Vít (advisor)
This thesis deals with heat treatment of tool steels. The work is divided into two parts. The theoretical part includes marking, properties and theoretical processing of tool steels. It also contains the technique which is used for sample preparation. In the experimental part there is an examination of the two common sold drills. Samples were made from the drill, on which metallographic analysis and heat treatment was performed.
|
|
|
List of Tool Materials in Forming Operations
Horník, Tomáš ; Podaný, Kamil (referee) ; Šlais, Miroslav (advisor)
The bachelor’s thesis elaborated within the scope of full-time study of specialization B-STI Mechanical Engineering is dealing with forming technologies and choice of tool steels for the production of forming tools. In the initial part of the work we are engaged in forming theoretical background, such as forming resists and shaping rules. Another section is devoted to tool steels and their most frequent heat treatment. In the following section of search is a basic description of the selected forming operations, including the use of machines and tools and highlight of the essential elements of the technology. Requirements for material of the tool are also listed there. The goal of this work is creating steel material sheet for cutting and extrusion tools and dies. These sheets are located in the attachment of this work.
|
|
|
Deformation of tool steels after quenching in vacuum furnaces
Abu Khait, Yosef ; Němec, Karel (referee) ; Pacal, Bohumil (advisor)
In this thesis, the deformation stages, which take place in tool steels after quenching in vacuum furnaces, were studied. This study was focused on the heating and cooling conditions during this type of quenching. In the experimental part, the deformation changes in particular samples made of tool steel after vacuum quenching were analyzed. Minor changes in the volume of samples at higher quenching temperatures compared to lower temperatures were observed.
|
|
| |
|
|
Analysis of tool steel cracking and a study of its elimination
Tomešek, Viktor ; Polzer, Aleš (referee) ; Píška, Miroslav (advisor)
The aim of this diploma thesis is to describe the causes and mechanisms of degradation processes that affect the surface of tools made of tool steel and to design and verify a practical solution that would lead to higher resistance of tools to these processes. Chapters in the theoretical part deal with fracture behavior of the material and the possibilities of its elimination, the experimental part includes testing of the effect of coating on the durability of hot forming tools.
|
|
|
Examination of degradation frequently repaired shearing and forming tools
Izák, Josef ; Kubíček, Jaroslav (referee) ; Sigmund, Marian (advisor)
The diploma thesis is focused on the renovation of forming tools made of tool steel, their weldability and assessment of the quality of tool repairs. The damaged tool was a part of the cutter from the progressive cutting tool made of Caldie steel. We used micro TIG technology to repair the damage. A total of three types of additional materials were used and investigated to restore the geometry of the damaged edge. One of the main purposes was to evaluate the possibility of extending the life of tools and reducing the implementation of already inefficient repairs. A number of destructive tests were performed for the assessment - macrostructure, microstructure, hardness measurement and EDS analysis.
|
|
|
High-Speed Steel Drills and their Uses
Jaroš, Aleš ; Dvořák, Jaromír (referee) ; Sliwková, Petra (advisor)
This Bachelor thesis, as one can deduct from the title, deals with high-speed steel drills and their uses into practice. The problem of high-speed steel is described step by step from division, chemist to heat treatment. Fundamental features of drilling method and tools that are suitable for drilling are described either. The last part of Bachelor thesis is focused on producers and application of high-speed steel drills to practice.
|
|
|
Cutlery steels and their composition and properties
Lenghardová, Monika ; Kaňa, Václav (referee) ; Záděra, Antonín (advisor)
This paper is focused on the description of steels suitable for blades production in terms of their chemical composition, structure, properties and thermal processing. The practical part is focused on the assessment of particular selected tool steels manufactured by conventional procedures - AK5, N690 and RWL34 steel manufactured by powder metallurgy. There were carried out the two methods of thermal processing with all three selected steels and the subsequent assessment was performed on the basis of the results of mechanical properties testing - three-point bend and hardness according to Rockwell, including the metallographic assessment of material structure.
|
|
|
The Influence of Heat Treatment on the Structure and Mechanical Properties of Tool Steels
Tobolík, Stanislav ; Němec, Karel (referee) ; Molliková, Eva (advisor)
This bachelor thesis deals with the properties of tool steels after heat treatment. The theoretical part describes the properties of iron and its alloys with carbon, and an overview of the use of steel. It is also discussed in detail the heat treatment of tool steels and manufacturing process analysis and metallographic sample. In the last part of the bachelor thesis there are described the mechanical testing of metals. In the practical part it is tested structure and mechanical properties of the selected tool steels for two types of heat treatment and the results are compared with the requirements imposed on it.
|
|
|
Surface treatment of selected steels using electron beam
Oríšek, Petr ; Jan, Vít (referee) ; Kouřil, Miloslav (advisor)
The thesis aims for the surface treatment of materials using electron beam. It includes a literary research describing physical principle and properties of the electron beam. This research also presents possible influencing of the beam and describes the construction of the device that generates the beam. Various applications of the electron beam for the material treatment are presented in the second part of the paper. Within this thesis an experiment with the heat treatment of the steel surface by the electron beam has been realized. The experiment was aimed at creating a layer as deep as possible without melting the surface. The results and their evaluation are presented in the experimental part of the thesis. The attention is also paid to selected process parameters.
|
guest ::
